Brother DCP-8085DN Service Manual page 109

■ Error code E2
Fuser Error
Turn the power off, then on again. Leave the machine for 15 min.
Central temperature of heat roller detected more than 280°C
Step
1 Fuser unit failure
2 Main PCB failure
■ Error code E6
Init Unable E6
See Troubleshooting and routine maintenance chapter in User's
Guide.
EEPROM error
Step
1 Main PCB failure
■ Error code EB
Print Unable EB
Turn the power off and then back on again.
E2PROM data laser unit error
Step
1 Main PCB failure
■ Error code EC
Print Unable EC
See Troubleshooting and routine maintenance chapter in User's
Guide.
Fuser fan performance failure
Step
1 Main fan failure
2 Main PCB failure
Cause
Cause
Cause
Cause
3-37
Remedy
Replace the fuser unit.
Replace the main PCB ASSY.
Remedy
Replace the main PCB ASSY.
Remedy
Replace the main PCB ASSY.
Remedy
Replace the main fan ASSY.
Replace the main PCB ASSY.
Confidential