Adf Chute Assy - Brother DCP-8085DN Service Manual

9.15 ADF Chute ASSY

(1) Disconnect the 7 connectors (for the model supporting the DX tray only) or 3 connectors
(for the model supporting no DX tray only) from the ADF relay PCB.
(2) Disconnect the connector of the ADF motor harness from the ADF motor.
(3) Remove the cup S M3x8 Taptite screw and ADF FG harness.
ADF motor
Taptite cup S M3x8
<Back side>
Document front sensor 2
(for the models with the DX only)
(4) Turn the Document cover LGL upside down and remove the cup B M3x10 Taptite screw.
Taptite, cup B M3x10
2
ADF FG harness
ADF relay PCB
Switch back sensor
(for the models with the DX only)
ADF relay PCB
ADF relay harness
Fig. 5-43
Fig. 5-44
ADF motor harness
S/B solenoid ASSY
(for the models with the DX only)
Document rear sensor
Document front sensor 1
PF solenoid ASSY
(for the models with the DX only)
Document cover LGL
5-52
1
Confidential