Regist Actuator Front/Regist Actuator Spring - Brother DCP-8085DN Service Manual

9.90 Regist Actuator Front/Regist Actuator Spring

(1) Slide the Regist actuator front to the direction of 1b while pressing the Hook to the
direction of 1a and pull up the Regist actuator front to remove. Then, remove the Regist
actuator spring from the Regist actuator front.
Regist actuator spring
Assembling Note:
• When assembling the Regist actuator spring, ensure that its direction is correct referring
to the figure below.
Regist actuator spring
Regist actuator front
1d
1c
1b
1a
Fig. 5-200
Hook
Fig. 5-201
Regist actuator front
Hook
Hook
5-145
Paper feed unit
Confidential