Unpacking The Printer - MINOLTA-QMS magicolor 3100 Installation Manual

„ Two CD-ROMs (Software Utilities and Documentation )
„ Documentation (see "Documentation Set" on page 5)
Interface cables aren't included in the shipment. If you need cables, contact
your local vendor or computer store.

Unpacking the Printer

5 "
We strongly suggest that you save the packaging materials in case
you ever need to move or ship the printer.
After removing the consumables from the printer carton, use the following
instructions to unpack your printer.
1
Remove the protective plastic cover.
WARNING!
Lift the printer only from the front and back. Lifting it from the sides may
cause it to tip over.
2
With another person's help, lift
the printer from the carton.
Do not tilt it more than 10° in
any direction at any time.
For best output quality and
longest consumables life,
place the printer on a hard, flat,
level, stable surface capable of
supporting about 77 lbs
(35 kg).
3
Remove the tape from the outside of the printer.
Attention
Do not plug in the power cord until told to do so.
Setting up Your Printer
Front
Hand grips
7