MINOLTA-QMS magicolor 3100 Installation Manual page 55

These Actions Will Result in Voiding Your Warranty
Print Media
Electrostatic
Discharge
Instructions
Modifications
Consumables
Imaging Unit or
Transfer Roller
Accessories
Attention
Don't return any merchandise to the manufacturer without calling for a
Return Merchandise Authorization (RMA) number. Refer to the Service
& Support Guide for the Support telephone number where you can
obtain an RMA number. If the RMA number is not prominently visible on
the outside of items returned, MINOLTA-QMS will not accept receipt.
Contact www.minolta-qms.com or your local vendor for purchase information
about currently approved media, consumables, and accessories, or check the
Service & Support Guide for the MINOLTA-QMS office closest to you. If you
have any questions, refer to www.minolta-qms.com/support, then click on the
Answer Base.
Warranty Considerations
„ Use of nonsupported transparency (OHP) media,
such as coated color transparencies.
„ Use of other nonsupported print media, such as ink
jet paper.
See chapter 2, "Using Media," in the User's Guide for
information about media. Check www.minolta-qms.com/
support (click on Answer Base) for currently approved
media. To order approved media, go to www.q-shop.com.
Failure to protect the printer controller board and any
associated daughterboard or module from electrostatic
discharge or damage while performing any task involving
the controller board.
Failure to follow instructions in the printer documentation.
Any modifications or changes to this product not expressly
approved in writing by the manufacturer responsible for
compliance to Federal Regulations could void your
authority to operate this product within the Laws and
Regulations of the Federal Communications Commission.
Use of consumables not manufactured or supported by
MINOLTA-QMS. Any damage to the printer or quality
problems caused by a refilled toner cartridge use.
Any damage resulting from mishandling the imaging unit
(including its four OPCs) or the transfer roller.
Use of accessories not manufactured/supported by
MINOLTA-QMS.
51