MINOLTA-QMS magicolor 3100 Installation Manual page 42

used with OS X, not all advanced printing features will be available.
Advanced printing features are still available under OS 9.1, or when print-
ing from the Classic Environment in OS X. To obtain the latest PPD for
OS X, connect to the MINOLTA-QMS website at www.minolta-qms.com
(select Online Help & Drivers), download the Macintosh OS X installer,
and follow the on-screen instructions.
Macintosh—EtherTalk Interface Configuration
This section briefly describes the configuration procedure for the printer
interface. You can make these configuration changes through any of the
following means:
„
Printer control panel
„
Print Utility for Macintosh
„
Remote Console
„
CrownView
When your printer boots up, it finds a default zone. If your network has more
than one zone, use the Administration/Communications/Resident NIC/
CrownNet/EtherTalk/Zone Name/Zone Part 1 and Zone Part 2 menus to enter
the name of the zone to which the printer is attached if you want it to appear
in a zone different than the one it shows in.
5 "
The two Zone Part x menus allow you to identify 1 zone with a name
up to 32 characters long. (Up to 16 characters can be entered in each
of the two menus). You cannot use these two menus to identify two
zones. Trailing spaces are not considered part of the zone name. All
standard printable ASCII characters are valid except the @ and '
symbols. The names are case sensitive.
Macintosh—PPDs
MINOLTA-QMS develops a PostScript Printer Description (PPD) file for every
printer it produces for the Macintosh. The Macintosh Operating System
includes a PostScript printer driver (LaserWriter) that uses this PPD to
provide support for features such as input bins, paper sizes, and advanced
color management.
38 Installing Printer Drivers and Software