About The Control Panel; Control Panel Indicators - MINOLTA-QMS magicolor 3100 Installation Manual

Selecting a Message Window Language
When you receive your printer, the message window language is set to
English. However, status messages and configuration menus can be
displayed in the message window in Czech, Danish, Dutch, English, French,
German, Italian, Japanese (Katakana), Portuguese, and Spanish. Chinese
(Simplified), Chinese (Traditional), and Korean (Hangul), don't display in the
control panel message window, but choosing them makes CrownView display
in the correct language.
Selecting a language in the control panel also allows media size selections
to be localized.
If you want to change the message window language, use the following
control panel sequence (slightly dependent upon the installed options):
Press Key
Online
Menu
Next ( )
Select
Previous (
Select
Previous (
Select
Next ( )/
Previous (
Select
5 "
The printer must be restarted for changes to the Keypad Language
menu to take effect. You can either let the printer restart automatically
after you save the change and exit from the Configuration menu, or
you can wait for the change to take effect the next time you manually
turn on the printer.

Control Panel Indicators

Indicator
A
B

About the Control Panel

(Until) Display Reads
IDLE (and online LED is off)
OPERATOR CONTROL
ADMINISTRATION
ADMINISTRATION–COMMUNICATIONS
ADMINISTRATION—MISCELLANEOUS
)
MISCELLANEOUS—SAVE DEFAULTS
MISCELLANEOUS—KEYPAD LANGUAGE
)
KEYPAD LANGUAGE—*ENGLISH
Press the Next and/or Previous key until the
language required is displayed
)
< LANGUAGE > IS SELECTED
Off On
No problem These lights indicate the latch that needs to be
pressed to gain access to the jam clearance
area corresponding to the jam message that
appears on the message window.
21