Windows-Usb - MINOLTA-QMS magicolor 3100 Installation Manual

information to the host. If you installed the Crown Print Monitor, follow the
instructions in this section to assign the new Crown port that was created.
1
From the Start menu, choose
Settings.
2
Choose Printers.
3
In the Printers window click the
right mouse button on the
magicolor 3100 printer icon to
display the printer's menu.
4
Choose Properties.
5
Choose the Details tab
(Windows Me/98/95) or Ports
tab (Windows XP/2000/NT4).
6
From the Print To The
Following Port list, choose
the Crown port that was
added during the Crown Print
Monitor installation.
7
Choose OK to close the Printer Properties window.
5 "
For additional information about the Crown Print Monitor, see the
Crown Print Monitor Administrator's Guide (in PDF format on the
Software Utilities CD-ROM). For information about the print
monitor that comes with Microsoft Windows 2000, see your
Windows documentation.
Windows—USB
Make sure your operating system (Win98SE and above, not including
Windows NT4) supports USB and make sure USB drivers for the port
are installed on your operating system (found on the Device Manager).
1
Turn the printer on and make sure the message window displays IDLE.
2
Plug one end of the USB cable into the PC and the other into the printer's
USB port.
The operating system displays
USB Device
The next screen that appears is the
listing
MINOLTA-QMS Printing Support
3
Click on Next.
4
Leave the next screen at the default selection
Best Device, Recommended,
36
New Hardware Found,
.
Installing Printer Drivers and Software
3100
3100
3100
3100
Add New Hardware Wizard
.
Search for the
and click on Next.
and lists