MINOLTA-QMS magicolor 3100 Installation Manual page 15

3
Holding the cartridge with both hands,
gently shake it seven or eight times to
distribute the toner.
5 "
The toner cartridge should be
shaken only at this point,
before installation and removal
of the toner seal in step 6.
4
Align the toner cartridge with the
cartridge guides, and gently push the
cartridge into the printer.
The cartridge should install easily.
5
Gently rotate the toner levers forward
to the locked (forward) position.
6
Pull the toner seal straight up.
Attention
Pulling the seal to the front or side
may damage the cartridge.
If the toner seal didn't pull completely
out because it was pulled with too
much force or it was not pulled
straight up while installing toner, call Technical Support. Refer to the
Service & Support Guide for the office nearest you.
7
Repeat steps 3 to 7 to install each of the remaining three toner cartridges.
8
Replace the top cover.
Setting up Your Printer
11