Control Panel Keys - MINOLTA-QMS magicolor 3100 Installation Manual

Indicator

Control Panel Keys

Key
PRINT
STATUS?
MP SIZE
22
Off On
No problem The printer requires operator attention (see the
status message in the message window).
The printer is The printer is receiving or processing data
not receiving through one or more of its interfaces (usually
data. accompanied by a status message in the
message window).
Function
The Online key switches the printer between on line and off
line status.
When off line, the printer continues printing until it has finished
all jobs received, but it doesn't accept any new data. Although
jobs continue to compile and print using the data already
received, a job may be interrupted. If a remote console has
taken the printer off line, pressing the Online key on the control
panel will not take effect until the remote console puts the
printer back on line.
You must take the printer off line before using all keys except
the Cancel, Print Status?, and MP Size keys.
The Cancel key allows you to cancel one or all print jobs. (See
the CrownBooks for complete information.) It also allows you to
end a job.
If the printer is on line, press the Cancel key to cancel the job
currently printing. To cancel the entire print job if the computer
has not completely sent the job, use the printer driver. If you
press the Cancel key by mistake, or if you decide not to cancel
a print job after pressing this key, press the Menu key to
"cancel" the Cancel key's function.
Use the Print Status? key to print status pages. At the
message on the control panel, press the Select
STATUS YES
key.
Use the MP Size key to set the multipurpose tray to the correct
media size. The media size must also be set in the driver.
About the Control Panel
PRINT