Unpacking The Printer - MINOLTA-QMS Magicolor 3100 Installation Manual

Unpacking the Printer

5 "
Save the packing materials in case you ever have to relocate your
printer or for future storage.
After removing the consumables and carton, use the following instructions to
unpack your printer.
1
Remove the protective plastic cover.
WARNING!
Lift the printer only from the front and back. Lifting it from the sides may
cause it to tip over.
2
With another person's help, lift
the printer from the carton.
Do not tilt it more than 10° in
any direction at any time.
For best output quality and
longest consumables life,
place the printer on a hard, flat,
level, stable surface capable of
supporting about 77 lbs
(35 kg).
3
Remove the tape from the outside of the printer.
Attention
Do not plug in the power cord until told to do so.
6
Front
Hand grips
Setting up Your Printer