Table of Contents
Advertisement
5.5 ALARM & EVENT SETTING
is a screen shot of the ALARM & EVENT SETTING MENU. This menu will walk you through
Figure 5-10
alarm and event setup.
5.5.1 Alarm
Alarm: Select the alarm number from 1 to 16.
Enable: Check box to enable alarm.
Log: Check box to record alarm events in the log.
Pre-alarm Record: Check box to record several moments before the alarm event. (Pre-alarm recording
rate will follow "Normal" frame rate setting)
Buzzer: Check box to enable buzzer when an alarm occurs.
Main Monitor: Monitor display options when a motion occurs.
No change: No change on the main monitor display.
Full screen: A full screen of the active camera will display on main monitor.
Call Monitor: Monitor display options when a motion occurs.
No change: No change on the call monitor display.
Full screen: A full screen of the active camera will display on call monitor.
Figure 5-10 Alarm & Event Menu - Alarm
55
Advertisement
Table of Contents
