Warranty - Open Date Digi-3-Coder Operator Instructions Manual

Digi-3-Coder (Issue 1.2)
STANDARD WARRANTY TERMS AND CONDITIONS – HOT FOIL PRINTERS
All Open Date Hot Foil Printers Carry a twelve (12) month return to base (at our
discretion) warranty.
Open Date printers should be installed and operated according to the instructions
given in the operating manual. No liability will be accepted for faults caused by
incorrect installation or operation of the equipment or if the product has been altered
or subjected to unreasonable use.
The following components are not covered by the warranty as they will be subject to
wear and tear: -
1. Print base rubber.
2. Hardened steel type.
Should you have cause to claim for repair under warranty then please contact our
service department stating the model, serial number of the product and the nature of
the problems or faults.
We reserve the right to charge for components replaced during the warranty period,
which are subsequently found to be damaged due to any of the above conditions not
being followed.
Any items repaired or replaced under warranty will carry the balance of the original
warranty period only.
6 October 2005 Page 42