STANDARD WARRANTY TERMS & CONDITIONS
All Open Date Hot Foil Printers Carry a twelve (12) month return to base (at our
discretion) warranty. Open Date printers should be installed and operated according to
the instructions given in the operating manual. No liability will be accepted for faults
caused by incorrect installation or operation of the equipment or if the product has been
altered or subjected to unreasonable use.
The following components are not covered by the warranty as they will be subject to
wear and tear: -
1.
Print base rubber.
2.
Type characters, dies and rotary databox wheels.
Should you have cause to claim for repair under warranty then please contact our
service department stating the model, serial number of the product and the nature of the
problem or fault.
We reserve the right to charge for components replaced during the warranty period,
which are subsequently found to be damaged due to any of the above conditions not
being followed.
Any items repaired or replaced under warranty will carry the balance of the original
warranty period only.
Eurocode-Digi50 06/08/13
FOR HOT FOIL PRINTERS
Page 37
Need help?
Do you have a question about the EUROCODE 150 and is the answer not in the manual?