Quick Dialing - NEC NEAX 2000 IPS Manual

General Description
This feature allows a PS user to receive dial tone and dial the desired number to originate a call.
Configuration Application
Integrated type and Adjunct Type
Operating Procedure
To originate a call:
1. Press the L1 key and receive dial tone.
2. Dial the desired number. The dialed numbers will be displayed on the LCD.
3. To end a call, press the END key.
Service Conditions
1. A maximum of 40 digits (numbers 0 to 9, #, and *) can be dialed. A maximum of 11 digits can be displayed
on the LCD.
2. The PS user can dial the number before hearing dial tone.
3. If no number is dialed within approximately 10 seconds, the user receives reorder tone.
4. If the interdigit timer expires while the user is dialing the number, the numbers dialed before the timer will
be sent out.
5. PS Authorization is activated for every call origination.

Quick Dialing

ND-91638-007(E)
Quick Dialing
Page 33
Issue 6