Soft Phone Wireless Handset - NEC NEAX 2000 IPS Manual

Soft Phone Wireless Handset

Soft Phone Wireless Handset
General Description
This feature allows a Soft Phone (D
user can select a handset (Soft Phone Handset or PS) by pressing the Handset Switch key on the Soft Phone.
Configuration Application
Integrated Type
Operating Procedure
The operating procedure is described using the example below.
Station:
Station No. 2000
• A call is originated by dialing from a PS or D
button, call logs or member buttons of D
• PS interactive operation can be set and cancelled, by pressing the function key on D
• Hold, Call Transfer, and Call Forwarding - All Calls/Busy Line/Don't Answer can be operated from either
term
a PS or D SP30.
• When the PS is out of cell, a call is forwarded to the logout destination of the D
• Even if a PS originates a call, the station number of D
To originate a call
■ To dial after placing the PS off-hook
1. Place the PS off-hook (hear dial tone).
2. Dial a desired station number 2000 from the PS.
3. The station answers to start conversation (3000 is displayed on the LCD of the station as a calling number).
Note: Only the PS can cancel dialing and end conversation. (Operation from the Dterm SP30 is disabled.)
Page 36
Issue 6
term
SP30) user to use a PS terminal as the handset of the Soft Phone. The
IPS
LAN
term
SP30. A call can also be originated using the address book
term
SP30.
term
ND-91638-007(E)
CS
PS
D
Station No.3000
term
SP30 is displayed on the called party terminal.
term
SP30:
term
SP30.
SP30.