Announcement-Ps No Answer/Announcement-Ps Out Of Cell - NEC NEAX 2000 IPS Manual

Announcement-PS No Answer/Announcement-PS Out of Cell

START
CM14 Assign a Digital Announcement Trunk (DAT)
card number to the required LEN.
NOTE 1:
NOTE 2:
CM12 Assign a tenant number to a PS Virtual station
number.
CM08 Specify whether RBT is sent when the called
PS is out of cell or the power is off.
NOTE:
Provide PS No-Answer feature.
Specify the type of No-Answer Timer.
CM41 Specify the message reply timer for An-
nouncement-PS No Answer.
A
DESCRIPTION
The DAT card number must be as-
signed to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4), and the seventh LEN (Lev-
el 6) of each LT slot.
EB000 and EB001 are dedicated to
built-in Digital Announcement
Trunk of MP card.
CM08>503 is effective only for Sta-
tion-to-Station call.
CHAPTER 3 SYSTEM DATA PROGRAMMING
(1) XX ZZZ (LEN)
XX : 00-59: FP No.
ZZZ: 000-127: Port No.
(2) EB002-EB127: Digital Announcement
For FP No. 00 : EB002-EB031
For FP No. 01 : EB032-EB063
For FP No. 02 : EB064-EB095
For FP No. 03 : EB096-EB127
NONE
• Y=04
(1) X-XXXXXXXX: Virtual Station No. as-
(2) 00-63: Tenant 00-63
(1) 503
(2) 0 : Not sent
1 : To send
(1) 504
(2) 0: Available
(1) 085
(2) 0: No-Answer timer (CM41 Y=0>86)
1: No-Answer timer (CM41 Y=0>01)
• Y=0
(1) 01
(2) 01-30: 4-120 seconds
If no data is set, the default setting is 32-36 sec-
onds.
– 130 –
WCS FEATURE PROGRAMMING
DATA
Trunk Card No.
: No data
signed by CM14
(4 second increments)
NWA-008855-001 Rev.1.0
avch3001.fm