Led Indication Of Cs; Cs Installation Conditions - NEC NEAX 2000 IPS Manual

LED Indication of CS

The table below shows the LED indication of the CS.
LED INDICATION
GREEN RED
ON OFF
FLASH OFF
OFF ON
OFF FLASH
OFF OFF

CS Installation Conditions

The CS should be located according to the following conditions.
ITEMS
Installation Location
Ambient Temperature
Relative Humidity
Radio Wave/Magnetism To avoid a place near and around equipment capable of emitting strong radio
Radio Disturbance
Static Electricity
Sunshine
Dust
Moisture
LED Indication of CS
CS STATE
Normal state
All voice channels are
busy.
Make busy by WCS
Out of order
Power is not supplied.
CS Installation Conditions
Wall, Ceiling, Shelf
To install on a place where is sufficiently strong.
–10 °C - 50 °C
45 - 85 % (non-condensing)
wave and magnetism.
To obtain a customer's consent in advance in consideration of radio distur-
bance when the site has medical or industrial equipment affecting people's
lives is placed.
To install on a place where hardly generates static electricity.
To avoid a place where the sun shines directly upon.
To avoid a place where is easy to gather dust.
To avoid a moist place and a drop of water.
Wait for a moment.
Make idle the CS from the WCS.
The CS needs to be repaired.
Confirm the connection of the line cable or the AC
adapter.
CONDITIONS
– 48 –
CHAPTER 2 INSTALLATION
INSTALLATION OF LEGACY CS
ACTION
–
NWA-008855-001 Rev.1.0
avch2001.fm