Call Forwarding-Not Available - NEC NEAX 2000 IPS Manual

Call Forwarding-Not Available

START
CM51 Assign the destination VMS station for Call
Forwarding-Not Available.
CM20 Assign the access code to set/cancel Call For-
warding when the incoming call is not avail-
able, and set the access code to replay the
message.
CM48 Specify whether confirmation of message ex-
istence by Special Dial Tone is available or
not.
If the second data is set to 0, the Special Dial
Tone is sent when a message exists.
CM12 Assign Service Restriction Class A to each PS
station.
CM15 Allow Service Restriction Class A for Call
Forwarding-Not Available.
END
DESCRIPTION
CHAPTER 3 SYSTEM DATA PROGRAMMING
• Y=20
(1) 00-63: Tenant No. of Virtual Station
(2) X-XXXXXXXX: VMS Station No.
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A189: Call Forwarding-Not Available Set
A190: Call Forwarding-Not Available
Cancel
A191: Call Forwarding-Not Available Re-
play
• Y=2
(1) 12: Confirmation by Dial Tone
(2) 0 : Available
1 : Not available
• Y=02
Service Restriction Class A
(1) X-XXXXXXXX: Virtual Station No. as-
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=115
Call Forwarding-Not Available
(1) 00-15: Service Restriction Class A
(2) 1 : Allow
– 133 –
WCS FEATURE PROGRAMMING
DATA
signed by CM14
assigned by CM12 Y=02
NWA-008855-001 Rev.1.0
avch3001.fm