Table of Contents
Advertisement
Performing a Basic Search
1.
Select a date using the Calendar
2.
Select a time using the hour and minute control bars
3.
Select one or more cameras
4.
Click Play (Video can be played forwards, backwards, or frame-by-frame.)
Adjust the Brightness of an Image
1.
Select an image to adjust by double-clicking on the desired image (Multiple images cannot be adjusted at one time.)
2.
Move the Bright slide bar to the right or left to adjust the brightness
3.
Reset the Brightness by moving the slider back to the center of the bar.
Zooming in on an Image
1.
Select an image to adjust by double-clicking on the desired image. (Multiple images cannot be adjusted at one time.)
2.
Move the Zoom slide bar to the right or left to zoom in or out of an image
3.
Reset the Zoom by moving the slider back to its original position on the bar
Zooming in on a Portion of an Image
1.
Using the mouse pointer, point to the area of interest on the image and click the right mouse button
2.
Keep clicking the right mouse button to zoom in further
3.
Continue clicking the right mouse button and the image zoom will cycle back to the original size
Time Sync
The Time Sync option synchronizes a single channel of video to playback in real time. Ordinarily the video may playback slower or faster
depending on several factors, including how many PPS recorded and number of cameras playing at the same time.
1.
Select a single image to synchronize by double-clicking on an image
2.
Click the Time Sync button (The video will now playback in real time.)
Clean Image
The DVR is capable of recording video using one of three different resolutions. When using the 720 x 480 resolution, two fields are mixed.
Because of the timing gap between the two fields, according to the standardized image rules, after image might occur to high speed moving
images. The remote software allows the user to remove this by clicking the Clean Image button.
27717AH
button in the Date Display
49
Advertisement
Table of Contents
