Table of Contents
Advertisement
SYSTEM
SYSTEM SETUP
To enter System Setup, press the Setup key on the front of the DVR and press the ENT key to select System Setup. Use the arrow buttons
on the front panel of the DVR or the remote control to navigate the display. Select Save and press the ENT key to update settings.
Video Format - NTSC > PAL.
Language - ENGLISH > SPANISH [User Selectable].
System ID - Required for the operation of multiple units using the supplied IR remote control. Each system must have a unique ID to
function properly.
Date Format - US (MM-DD-YYYY) > EURO (DD-MM-YYYY) > ASIA (YYYY-MM-DD) – [User Selectable].
Date - Press the ENT key to select the Date and use the number keys and/or arrow buttons to set the date. Press the ENT key again
to deselect.
Time - Press the ENT key to select the Time and use the number keys and/or arrow buttons to set the time. Press the ENT key again
to deselect.
Time Zone - Press the ENT key to open the Time Zone window. Use the arrow keys to navigate the list and press the ENT key to
make selection. Select Exit and press the ENT key to close the window.
NOTE: The date and time must be set manually; changing the time zone will not automatically change the Time/Date display.
Use DST – After completing the Time Zone setup, highlight USE DST and press the ENT key to turn Daylight Saving
Time ON / OFF.
NTP – Highlight NTP (Network Time Protocol) and press the ENT key to SYNC the DVR with the Network Time.
Keypad Beep - ON > OFF [Enables / Disables Audible keypad touch confirmation].
Auto Menu Time Out – OFF or 1-10 Minutes [This feature will close the Setup Menu after XX minutes of inactivity. This is a security
feature.]
14
SYSTEM SETUP
VIDEO FORMAT
LANGUAGE
SYSTEM ID
DATE FORMAT
DATE
TIME
TIME ZONE
USE DST
NTP
KEYPAD BEEP
AUTO LOG OFF
SAVE
NTSC
ENGLISH
0
MM-DD-YYYY
11/06/2006
10:44:48
GMT-08:00..
OFF
OFF
OFF
OFF
CANCEL
27717AH
Advertisement
Table of Contents
