Access Remote Connection; Using The Remote Software; Setting The Time And Date - OpenEye OE2-E12016 User Manual

ACCESS REMOTE CONNECTION

1. Open the Remote Software.
2. Click on the icon of the server as defined previously.
3. Enter the user name and password of an authorized remote user as defined in the Network > Client Setup > User Menu on the
E120 system.
NOTE: User Name and Password are both case sensitive.
4. Click the Connect button.

USING THE REMOTE SOFTWARE

SETTING THE TIME AND DATE

1. Exit to Windows by clicking the Exit button on the Main Display Screen and selecting Restart in Windows Mode.
2. Open Windows Explorer. Do this by right-clicking on the My Computer Icon (located on the top left hand corner of the Desktop)
and select Explore.
3. Click on Control Panel to open it. If you do not see Control Panel listed, Click My Computer to expand the folder tree.
4. Double Click on Date and Time inside Control Panel.
5. Adjust the Date and Time.
6. When finished, close all open windows and restart the DVR. Do this by clicking the Start button (located on the lower left hand
side of the Desktop) and selecting Shut Down.
40 27717AH