Auto Provisioning Server Address; Figure 49 Lcd Menu: Serv Addr; Figure 50 Lcd Menu: Serv Addr Error; Table 12 Lcd Menu: Static Ip - ZyXEL Communications V300 Series User Manual

Press to toggle auto provisioning HTTP, HTTPS, and TFTP.
The following table describes the labels in this screen.

Table 12 LCD Menu: Static IP

LABEL
HTTP
HTTPS
TFTP

6.4.3 Auto Provisioning Server Address

Select Adv > Auto Prov > Serv Addr. The following screen displays.

Figure 49 LCD Menu: Serv Addr

3. Serv Addr
Press to configure the auto provisioning server's IP address.
If you make a mistake, use the PHONEBOOK key to delete your entry one number
at a time (you can use the asterix key [*] to enter periods). Press
the address.
If the IP address that you entered is malformed or contains mistakes, then the
following error message displays.

Figure 50 LCD Menu: Serv Addr Error

3. Serv Addr
Invalid IP Addr
Otherwise, the IP address that you entered is locked into the phone until manually
edited again later. You can edit or delete the IP address by entering this screen
and using the PHONEBOOK key to clear entries.
V300 Series User's Guide
DESCRIPTION
Select this option if the SIP server to which your V300 is
registered uses HTTP as its auto provisioning protocol.
Select this option if the SIP server to which your V300 is
registered uses HTTPS as its auto provisioning protocol.
Select this option if the SIP server to which your V300 is
registered uses TFTP as its auto provisioning protocol.
1
Chapter 6 LCD Menus: Advanced
again to save
69