Chapter 2 Hardware
The following table describes the rear panel hardware.
Table 4 Rear Panel Hardware
LABEL DESCRIPTION
1
Power socket
2
LAN port
3
PC port
Figure 7 Base Panel Hardware
The following table describes the rear panel hardware.
Table 5 Base Panel Hardware
LABEL
1
2
36
Attach the included power adaptor, if you are not using
Power over Ethernet (V301 only). See the product
specifications appendix for power supply specifications.
Note: Use only the power adaptor and cable that
Use an Ethernet cable to connect to your network.
Use an Ethernet cable to connect a computer for
configuration, or to access the Internet.
DESCRIPTION
Wall-mounting holes
Use these to hang the V300 on a wall. See the wall-
mounting appendix for details.
Handset port
Use this to attach the included handset cable's RJ-11
connector.
came with your V300.
V300 Series User's Guide