The Lcd Screen; Resetting The V300; Phone Functions; Making A Call - ZyXEL Communications V300 Series User Manual

Zyxel v300 series ip phones user's guide
Hide thumbs Also See for V300 Series:
Table of Contents

Advertisement

Table 5 Base Panel Hardware
LABEL
DESCRIPTION
3
Reset button
4
Cable channel

2.2.1 The LCD Screen

When the V300 is on, the LCD (Liquid Crystal Display) screen shows either the
status screen, a phonebook screen, or a configuration menu.
The LCD menus allow you to configure and control the V300. See
page 45
for details on configuring the V300 via the LCD menus.

2.2.2 Resetting the V300

If you want to reset the V300 to its factory defaults (if you forgot the web
configurator password, for example) press and hold the RESET button for
approximately ten seconds. The V300 restarts automatically.
Note: If you reset the V300, all settings return to their factory defaults. All data stored
in the V300 (phonebook entries, for example) will be lost.

2.3 Phone Functions

This section describes how to use your V300's basic telephone functions. See
Chapter 3 on page 45
and
Chapter 4 on page 51

2.3.1 Making a Call

Start the call:
1
• If you want to use the handset:
Lift the handset.
• If you want to use the speakerphone:
Press the SPEAKER key.
V300 Series User's Guide
Use this to return the V300 to its factory default
settings. See the appendix on product specifications for
the default settings.
Note: If you do this, all configuration changes and
data on the V300 are lost, including
phonebook records.
Clip the V300's handset cable into this.
for information on the using the V300's LCD screen menus
for information on how to use the V300's phonebook.
Chapter 2 Hardware
Chapter 3 on
37

Advertisement

Table of Contents
loading

Table of Contents