Http Firmware Upgrade Server Address; Restore Factory Default Settings; Figure 32 Menu > Setup > Phone Setting > Fw Upgrade > Server Address; Figure 33 Menu > Setup > Phone Setting > Restore Factory - ZyXEL Communications V-630 User Manual

5.17 HTTP Firmware Upgrade Server Address

Press Menu > Setup > Phone Setting > FW Upgrade > Server Address to display the
following screen. Use this menu to specify the server's address. The port configuration menu
works in a similar manner, except you can only input numbers.
Figure 32 Menu > Setup > Phone Setting > FW Upgrade > Server Address
---Server Address---
Done ABC
The following table describes the labels in this screen.
Table 33 Menu > Setup > Phone Setting > FW Upgrade > Server Address
LABEL
Server Address
Done
ABC
Back
Clear

5.18 Restore Factory Default Settings

Press Menu > Setup > Phone Setting > Restore Factory to display the following screen. Use
this menu to reset the V630 to the factory default settings.

Restoring the factory default settings resets all of the phone's settings except
your phone book entries.
Figure 33 Menu > Setup > Phone Setting > Restore Factory
---Restore Factory--
Are you sure,
reset to
default?
Yes
V630 User's Guide
Back
DESCRIPTION
Input the IP address or URL of the HTTP server with the firmware file. When you
press a key, other character options appear above the input field. Press a key
multiple times to input one of the characters above.
Press this to save your setting.
Press # to switch between the lower-case and upper-case input modes.
Press this to return to the previous screen.
After you start inputting text, Back changes to Clear. Press this to backspace.
Cancel
Chapter 5 General Setup LCD Menus
59