In this menu, enable and configure your V300's voice VLAN ID and priority. Select
Adv Setting > VLAN. The following screen displays.
Figure 69 LCD Menu: VLAN
1. VLAN
(Off)
Press
to toggle VLAN OFF and ON.
The following table describes the labels in this screen.
Table 17 LCD Menu: VLAN
LABEL
VLAN
VLAN ID
VLAN PRIORITY
6.9 LCD Contrast
Select Adv Setting > LCD Contrast. The following screen displays.
Figure 70 LCD Menu: LCD Contrast
Contrast:-+
V300 Series User's Guide
VLAN1
V300
7
6
5
DESCRIPTION
Select this to enable the VLAN. Select this if the V300 has to be a
member of a VLAN to communicate with the SIP server. Ask your
network administrator if you are unsure.
Enter the VLAN ID provided by your network administrator. Your
LAN and gateway must be configured to use VLAN tags.
If the V300 is a member of a VLAN group, you may choose a
priority level for its VoIP traffic within the VLAN. The priority level
is from 0-7, with 0 being the lowest level and 7 being the highest
level. You can assign the V300 with a higher traffic priority for
better voice quality.
Chapter 6 LCD Menus: Advanced
77