ZyXEL Communications V300-T1 Quick Start Manual
Zyxel communications telephone quick start guide
Hide thumbs
Also See for V300-T1:
- User manual (180 pages) ,
- Quick start manual (168 pages) ,
- Release note (5 pages)
Related Manuals for ZyXEL Communications V300-T1
Summary of Contents for ZyXEL Communications V300-T1
-
Page 1: Quick Start Guide
V300 IP Phone Quick Start Guide Version 1.00 5/2007 Edition 1 Copyright © 2007. All rights reserved. -
Page 2: Hardware And Connections
VoIP account. • Phone Operation - covers how to use the V300’s basic telephone functions, such as mak- ing a call. You can also configure the V300 using a computer connected to the V300’s PC port. See your User’s Guide for details. -
Page 3: Feature Description
The following table describes some of the hardware features used for basic operations. See the hardware chapter in your User’s Guide for full descriptions of all features. FEATURE DESCRIPTION MENU Press this to select the phone line to use. When you are using the V300’s menus, press this key to do the following: •... -
Page 4: Making Hardware Connections
1.1 Making Hardware Connections 1 LAN: Use an Ethernet cable to connect the V300 to your network. 2 PC (optional): Use an Ethernet cable to connect your computer to the PC port on the V300 to access your network through the V300, or to configure the V300 using the web configurator (see your User’s Guide for information on using the web configurator). -
Page 5: Initial Configuration
2 Initial Configuration This section describes how to use the phone’s LCD screen menus to: • Set up Your Network Connection • Set up Your Voice Account The phone does not need to be connected to a computer to do this. However, if you want to configure your V300 using a computer, see your User’s Guide for information. - Page 6 1 Press the navigator up or down to access the menu, and scroll down to Adv Setting. Press Menu. You can also use the alphanumeric keypad to make your selections in the LCD screen. For example, you can press the 6 key in the Menu Setting screen (above) to go to the Adv Setting screen.
- Page 7 6 The PPPoE Username menu displays. Press Menu and enter your user name. Press Menu again when you are done. 7 Press 3 to enter the PPPoE Password menu. Press Menu. The PPPoE Password menu displays. 8 Press Menu and enter your password. Press Menu again when you are done.
- Page 8 6 Press Menu to configure the new IP address. Enter the new IP address and press Menu again. 7 The Static IP menu displays again. Scroll down and set up the Gateway IP address, Subnet Mask and 1st and 2nd DNS servers (if you have information about only one DNS server, set up the 1st DNS only).
- Page 9 2.2 Set up Your Voice Account Follow these steps to configure your VoIP account. 1 Go to the main screen (see section 2.1). 1 Press the navigator down to enter the menu system. Then, press 6 to enter the Adv Setting menu.
- Page 10 FIELD DESCRIPTION 7 Register Port This is the port the SIP register server uses to register the V300. The default is 5060. 8 Serv Domain If you have a SIP account like 1234567@voip-provider.com, the SIP service domain is voip-provider.com. 9 SIP Auth ID This is the user name for this SIP account.
-
Page 11: Phone Operation
If this does not help, contact your network administrator or VoIP service provider. 3 Phone Operation This section describes how to use your V300’s basic telephone functions. For more information on the V300’s telephone functions, see the hardware chapter in your User’s Guide. -
Page 12: Ending A Call
ENDING A CALL When you want to end a call, press the HANG UP key. Alternatively, do one of the following: • If you are using the handset, replace it in the cradle. • If you are using the internal speakerphone, press the SPEAKER key. •... - Page 13 V300 Quick Start Guide...