Ring Setting; Flexworker Mode; Using Flexworker Mode; Figure 71 Lcd Menu: Ring Type - ZyXEL Communications V300 Series User Manual

Chapter 6 LCD Menus: Advanced
Use the VOLUME keys to increase or decrease the contrast. Press
back to the previous menu when you are done.

6.10 Ring Setting

Select Adv Setting > Ring Setting. The following screen displays.

Figure 71 LCD Menu: Ring Type

Ring Type:
Chirp 0
Use the
back to the previous menu when you are done.

6.11 Flexworker Mode

Use this menu to turn Flexworker mode on or off.
The Flexworker feature allows you to "carry" your V300 settings with you when
you change locations but are still using a compatible V300 phone.
Select Adv Setting > Flexworker. The following screen displays.

Figure 72 LCD Menu: Flexworker Mode

Flexworker Mode
On
Use the
previous menu when you are done.

6.11.1 Using Flexworker Mode

The Flexworker system lets a person use any V300 connected to an IP PBX that
supports auto-provisioning (such as the ZyXEL X6004) and retain its account-
specific settings.
All available V300 phones are suitable candidates as long as Flexworker is
activated in them. A person can log into any one of them. An unavailable IP phone
cannot be chosen as it is one that someone is already logged into it. It can only be
used once that person logs out.
78
keys to cycle through the available ring types. Press
key to turn Flexworker mode either On or Off. Press
or to go
or to go
to go back to the
V300 Series User's Guide