Sip Settings; Registrar Server - ZyXEL Communications Prestige 2000W Quick Start Manual

6 Select PPPoE Pwd.
7 Clear the PPPoE password and enter your's.
8 The Prestige restarts when you return to the main screen.

3.3 SIP Settings

The Prestige uses Session Initiated Protocol (SIP), an internationally recognized standard for implementing
VoIP. The last step in initial configuration is to register your Prestige with your voice service provider's SIP
server.

3.3.1 Registrar Server

Configure the Registrar settings to have the Prestige register with your provider's SIP registrar server.
Note: If you have no registrar server information, use the SIP server IP address and port number.
1 Select SIP Settings in the first menu screen.
2 Select Registrar.
3 Select Registrar IP.
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560
Prestige 2000W Quick Start Guide
12
3. PPPoE Pwd
1. Network Mode
2. PPPoE Name
Select Back
PPPoE Pwd
*************************
Ok Aa1@ Clear
5. SIP Settings
6. Settings
7. Wireless
Select Back
1. Registrar
2. OutboundProxy
3. Proxy Server
Select Back
1. Registrar IP
2. Port
3. Expiry Time
Select Back