C
H A P T E R
10.1 Overview
This chapter discusses the V300's VoIP > SIP screens.
10.1.1 What You Can Do in This Chapter
• The SIP Settings screen lets you maintain basic information about each SIP
account
(Section 10.2 on page
• The Advanced SIP Setup screen lets you maintain advanced settings for each
SIP account
• The SIP QoS screen lets you maintain ToS and VLAN settings for the V300
(Section 10.3 on page
10.1.2 What You Need to Know About Network Setup
The following terms and concepts may help you as you read through this chapter.
VoIP
VoIP (Voice over IP) is the sending of voice signals over the Internet Protocol. This
allows you to make phone calls and send faxes over the Internet at a fraction of
the cost of using the traditional circuit-switched telephone network. You can also
use servers to run telephone service applications like PBX services and voice mail.
Internet Telephony Service Provider (ITSP) companies provide VoIP service. A
company could alternatively set up an IP-PBX and provide its own VoIP service.
Circuit-switched telephone networks require 64 kilobits per second (kbps) in each
direction to handle a telephone call. VoIP can use advanced voice coding
techniques with compression to reduce the required bandwidth.
SIP
The Session Initiation Protocol (SIP) is an application-layer control (signaling)
protocol that handles the setting up, altering and tearing down of voice and
multimedia sessions over the Internet.
V300 Series User's Guide
SIP Account Setup
109).
(Section 10.2.1 on page
117).
113).
10
101