Printer Setting - Konica Minolta bizhub C250 Service Manual

Hide thumbs Also See for bizhub C250:

Table of Contents

Field Service Ver. 1.0 Jul. 2005

Printer Setting

A. Basic Setting

(1) PDL Setting

• To set the PDL (Page Description Language) for PC printing.

• To fix the PDL as necessary. It usually switches automatically.

• The default setting is Auto.

(2) Number of Sets

• To set the number to be copied when not specified by the printer driver during PC

• To use when the number cannot be specified by the printer driver during printing from

Windows DOS, etc.

• The default setting is 1.

(3) Original Direction

• To set the default setting for the direction of the original during PC printing.

• The default setting is Portrait.

(4) Spool Print Jobs in HDD before RIP

• To set whether to store the print data to HDD when receiving the next job during Rip

process of the current job.

• The default setting is OFF.

(5) A4/A3 ↔ LTR/LGR Auto Switch

• To set whether to switch between A4 and Letter size paper, and A3 and Ledger size

paper in reading.

• To output Letter size document to A4 size, and Ledger size document to A3 size.

• To output A4 size document to Letter size, and A3 size document to Ledger size.

• When switching the size, the image will be printed in the same magnification.

• The image will not be reduced when there is image deficiency.

• The default setting is OFF.

"1" (1 to 999)

8. Utility Mode

Table of Contents