Cleaning Of The Registration Roller; Replacing The Waste Toner Box - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 1.0 Jul. 2005
3.5.8

Cleaning of the Registration Roller

[1]
3.5.9

Replacing the Waste Toner Box

[1]
[2]
1. Open the Right Door.
2. Using a soft cloth dampened with
alcohol, wipe the Registration Roll-
ers [1] clean of dirt.
4038F2C017DA
1. Open the Front Door.
2. Press the Waste Toner Box release
lever [1].
4038F2C541DA
3. Remove the Waste Toner Box [2].
NOTE
• Raise the Waste Toner Box gently
before removing it.
• If scattered toner has accumulated
in the vicinity of the toner collecting
port, do not tilt the Waste Toner Box
when removing it.
• Do not leave the Waste Toner Box in
a tilted condition after removing it.
4038F2C542DA
3. Periodical check
27