Konica Minolta bizhub C250 Service Manual page 213

8. Utility Mode
B. Paper Setting
(1) Paper Tray
Functions • To set the Paper Feed Tray when not specified by the printer driver during PC print-
ing.
Use • To use when Paper Feed Tray cannot be specified by the printer driver when printing
from Windows DOS, etc.
Setting/
• The default setting is Auto.
Procedure
(2) Default Paper Size
Functions • To set the paper size when not specified by the printer diver during printing.
Use • To use when the paper size cannot be specified by the printer driver during printing
from Windows DOS, etc.
(3) 2-Sided Print
Functions • To set whether to carry out duplex print during PC printing when not specified by the
printer driver.
Use • To use when 2-sided printing cannot be specified by the printer driver while printing
by Windows DOS, etc.
Setting/ • The default setting is OFF.
Procedure
(4) Bind Direction
Functions • To set the binding direction during duplex printing when not specified by the printer
driver during PC printing.
Use • To use when binding direction cannot be specified by the printer driver during printing
by Windows DOS, etc.
Setting/ • The default setting is Left Bind.
Procedure
(5) Staple
Functions • To set whether to staple or not when not specified by the printer driver during PC
printing.
Use • To use hen staple is not specified by the printer driver during printing by the Windows
DOS, etc.
Setting/ • The default setting is OFF.
Procedure
170
ON
Top Bind "Left Bind"
1 Position 2 Positions
Field Service Ver. 1.0 Jul. 2005
"OFF"
Right Bind
"OFF"