Konica Minolta bizhub C250 Service Manual page 303

10. Service Mode
(4) Communication Log Print
Functions • To print out the Communication Log.
Use • Use to output and use the Communication Log.
Setting/ 1. Call the Service Mode on the screen.
Procedure 2. Touch [CS Remote Care].
3. Touch [Detail Setting] to access Communication Log Print.
4. Load Tray 1 or Bypass Tray with A4R or 81/2 x 11 paper.
5. Press Start key to print out the Communication Log.
(5) Software Switch Setting
Functions • To change the CS Remote Care settings.
Use • To change the settings for CS Remote Care as necessary.
☞
Setting/ For procedures on settings, see 252.
Procedure
(6) Response Time Out
Functions
Use
• Not Used. (To be used when connected by E-mail.)
Setting/
Procedure
D. AT Command
Functions • To set the command to be issued at the time of Modem Initialization.
• This setting is available only when [Modem] is selected for the system setting.
Use • To set the command to be issued at the time of Modem Initialization.
Setting/
• Enter the command and touch [SET] to register.
Procedure
E. Server set
Functions
Use
• Not Used.
Setting/
Procedure
260
Field Service Ver. 1.0 Jul. 2005