Konica Minolta bizhub C250 Service Manual page 251

8. Utility Mode
<Domain Name>
Functions • To set the Domain Name for connecting to LDAP server.
Use • To set the Domain Name for connecting to LDAP server.
Setting/ 1. Touch [Domain Name].
Procedure 2. Enter the domain name (up to 64 characters) on the on-screen keyboard, and touch
[OK].
<Dynamic Authentication>
Functions • To set whether to enable or disable the Dynamic Authentication.
Use • To enable the Dynamic Authentication.
Setting/ • The default setting is Disable.
Procedure
NOTE
• The setting is not available when Authentication method is set to anonymous.
<Reset All Settings>
Functions
• To return the contents registered in the LDAP server to what they were prior to the
shipping.
Use
Setting/ 1. Touch [Reset All Settings].
Procedure 2. Check the message and touch [Yes].
H. E-Mail Setting
(1) E-Mail TX (SMTP)
<E-Mail TX Setting>
Functions • To set whether to enable or disable the E-mail transmission setting.
Use • To disable the E-mail transmission setting.
Setting/ • The default setting is ON.
Procedure
<SMTP Server Address>
Functions • To set the SMTP server address.
Use • To enter the SMTP server address.
Setting/ • SMP Server Address Version 4 format
Procedure [0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
1. Touch [Host Address].
2. Select [IP Address Input], and enter IP Address.
3. Select [Host Name Input], and enter the host name.
208
Enable
"ON"
Field Service Ver. 1.0 Jul. 2005
"Disable"
OFF