10. Set Error Detection - Konica Minolta bizhub C250 Service Manual

10. Set error detection

10. Set error detection
• When the ADF or cover set error for some reason is detected, the Panel of the main unit
will have the following display.
<Panel display and detection timing for each>
Panel
Description of error
display
Paper Exit section Cover
[1]
set error
Transport Tray section
[2]
Cover set error
Paper Take-Up section
[3]
Cover set error
— ADF set error
34
[3]
Detection start
When the Main Power
Switch turn ON.
When the Main Power
Switch turn ON.
When the Main Power
Switch turn ON.
When the document is set
in the ADF
Field Service Ver. 1.0 Jul. 2005
[2]
[1]
4582F4E501DA
Detection timing
Paper Exit section Open/Close
Sensor (when light-blocked)
Transport Tray Open/Close Sensor
(when light- blocked)
Paper Take-Up Section Open/
Close Sensor (when light-blocked)
Size Reset Switch on the main unit
(when turned ON)