Konica Minolta bizhub C250 Service Manual page 515

3. Firmware upgrade
3. Mount the Compact flash on the PC, and check the Drive name, which was recognized
in the Windows. (F-drive in the following figure)
→
4. Click [Start] [Program]
mand Prompt.
5. Use the Command prompt to move into the uncompressed directory.
6. Specify the Drive of Compact flash, which was recognized through the procedure 3,
and execute the "mkcf.bat." (Input the C: \C250\card_work>mkcf f (Drive number): in
the below figure, and push the "Enter".)
8
→ →
[Accessories] [Command Prompt] to open the Com-
Field Service Ver. 1.0 Jul. 2005
4038F2E564DA
4036fs2623e0