Konica Minolta bizhub C250 Service Manual page 259

8. Utility Mode
(2) Receive Mode
Functions • To set the Fax reception mode.
Use • To change to manual reception when using the remote reception function, etc. when
connected to the external telephone.
Setting/ • The default setting is Auto RX.
Procedure
(3) Number of RX Call Rings
Functions • To set the number of times to receive call rings.
Use • To change the number of times of the fake RingBack tone after it starts calling until it
starts receiving.
Setting/ • The default setting is 2 X.
Procedure
(4) Number of Redials
Functions • To set the number of redials.
Use • To change the number of times to redial when the line is busy, etc.
• The line which can be set up is different depending on the country.
Setting/
NOTE
Procedure
• The default setting is different depending on the country.
(5) Redial Interval
Functions • To set the interval for redialing.
Use • To change the interval for redialing.
Setting/ • The default setting is 3 min.
Procedure
(6) Line Monitor Sound
Functions
• To set whether to output the Line monitor sound from the speaker or not.
Use
Setting/ • The default setting is ON.
Procedure
(7) Line Monitor Sound Volume
Functions • To set the volume of the speaker.
Use • To change the volume of the speaker.
Setting/
• Change the volume by touching the [Lower] or [Higher].
Procedure
216
"Auto RX"
"2 X" (0 to 15)
"3 min" (1 to 15)
"ON"
Field Service Ver. 1.0 Jul. 2005
Manual RX
OFF