Ethernet Settings; Set Ethernet Speed And Transmission Mode; Configure Your Management Interfaces - HP WL520 User Manual

ethernet settings

ethernet settings
ethernet settings ethernet settings

set ethernet speed and transmission mode

set ethernet speed and transmission mode
set ethernet speed and transmission mode set ethernet speed and transmission mode
Figure 2-18 Figure 2-18 Ethernet Interface Ethernet Interface
Figure 2-18 Figure 2-18 Ethernet Interface Ethernet Interface
Select the desired speed and transmission mode from the pull down menu. Half-duplex means that only one side can
broadcast at a time, full-duplex allows both sides to transmit, while auto-duplex selects the best transmission mode for the
given configuration. The recommended setting is
10 Mbit/s - half duplex, full duplex, or auto duplex
100 Mbit/s - half duplex, full duplex, or auto duplex
auto speed - half duplex, auto duplex

configure your management interfaces

configure your management interfaces
configure your management interfaces configure your management interfaces
Select which interfaces will be available through the Wireless, Ethernet, and Serial Port interfaces of the WL520 unit.
Figure 2-19 Figure 2-19 Figure 2-19 Figure 2-19 Management Interface Settings Management Interface Settings Management Interface Settings Management Interface Settings
. Choose between:
auto-speed-auto-duplex auto-speed-auto-duplex
auto-speed-auto-duplex auto-speed-auto-duplex
Ethernet Settings
2-19