Save Configuration; Figure 5-50: Save Configuration Screen - AudioCodes MediaPack MP-102 User Manual

MP-1xx SIP User's Manual

5.12 Save Configuration

The Save Configuration screen enables users to save the current parameter configuration and
the loaded auxiliary files to the non-volatile memory so they are available after a power fail.
Parameters that are only saved to the volatile memory revert to their previous settings after
hardware reset.
Note that when performing a software reset (i.e., via Web or SNMP) you can choose to save the
changes to the non-volatile memory. Therefore, there is no need to use the Save Configuration
screen.
Note:
To save the changes to the non-volatile, take these 2 steps:
Click the Save Configuration button on the main menu bar; the 'Save Configuration' screen
1.
is displayed.
Click the Save Configuration button in the middle of the screen; a confirmation message
2.
appears when the save is complete.
Version 4.4
Saving changes to the non-volatile memory may disrupt traffic on the gateway.
To avoid this, disable all traffic before saving.

Figure 5-50: Save Configuration Screen

139
5. Configuring the MP-1xx
March 2005