Figure 5-46: Load A Cpt File Screen - AudioCodes MediaPack MP-102 User Manual

MP-1xx SIP User's Manual
Follow the same procedure you followed when loading the ini file (refer to Step 6). The same
7.
procedure applies to the 'Load a VP file' (not applicable to the MP-1xx gateway) screen and
'Load a coefficient file' screen.
In the 'FINISH' screen (refer to
8.
upgrade process by clicking Reset or Cancel.
Button Result
The MP-1xx 'burns' the newly loaded files to flash memory. The 'Burning files to flash
Reset
memory' screen appears. Wait for the 'burn' to finish. When it finishes, the 'End Process'
screen appears displaying the burned configuration files (refer to
The MP-1xx resets, utilizing the files previously stored in flash memory. (Note that these
Cancel
are NOT the files you loaded in the previous Wizard steps).
Version 4.4

Figure 5-46: Load a CPT File Screen

Figure 5-47), the Next button is disabled. Complete the
135
5. Configuring the MP-1xx
Figure 5-48).
March 2005