Mp-1Xx Front Panel Leds; Mp-1Xx Rear Panel; Mp-10X Rear Panel; Table 2-2: Indicator Leds On The Mp-1Xx Front Panel - AudioCodes MediaPack MP-102 User Manual

2.1.2

MP-1xx Front Panel LEDs

Table 2-2 lists and describes the front panel LEDs on the MP-1xx.
Note:
Label Type
Device Status
Ready
Ethernet Link
LAN
Status
Control Link
Control
Packet Status
Data
Telephone
Channels
Interface
2.2

MP-1xx Rear Panel

2.2.1

MP-10x Rear Panel

Figure 2-3 illustrates the rear panel layout of the MP-104. For descriptions of the MP-10x rear
panel components, refer to
to Table 2-4.
Tip 1:
Tip 2:
MP-1xx SIP User's Manual
MP-1xx (FXS/FXO) media gateways feature almost identical front panel
LEDs; they only differ in the number of channel LEDs that correspond to the
number of channels.

Table 2-2: Indicator LEDs on the MP-1xx Front Panel

Color
Green
Orange
Red
Green
Red
Green
Blank
Green
Red
Blank
Green
Green
Red
Blank
Table 2-3. For the functionality of the MP-10x rear panel LEDs, refer
MP-10x (FXS/FXO) media gateways feature almost identical rear panel
connectors and LEDs, located slightly differently from one device to the next.
The RJ-45 port (Eth 1) on the MP-10x/FXO rear panel is inverted on the MP-
1xx/FXS. The label on the rear panel also distinguishes FXS from FXO
devices.
State
ON Device Powered, self-test OK
Blinking Software Loading/Initialization
ON Malfunction
ON Valid 10/100 Base-TX Ethernet connection
ON Malfunction
Blinking Sending and receiving SIP messages
No traffic
Blinking Transmitting RTP (Real-Time Transport Protocol)
Packets
Blinking Receiving RTP Packets
No traffic
-
ON Offhook / Ringing for FXS Phone Port
FXO Line-Seize/Ringing State for Line Port
There's an incoming call, before answering
Blinking
ON Line Malfunction
- Normal
22
MP-1xx SIP
Function
Document #: LTRT-65404