Caliper Installation - Honda CB400T Shop Manual

HONDA
HYDRAULIC DISC BRAKE
C B 4 0 0 T
Assemble caliper B and caliper carrier toge-
ther, making sure that the boot
is
seated
in the caliper shaft groove properly.
Install the carrier on the front fork.
TORQUE SPECIFICATION:
3.04.0
kg-m (22-29 lbs-ft)
CALIPER COVER
q8
LEEDER VALVE
CALIPER PISTON
SILICON GREASE OR
CALIPER CARRIER BRAKE FULlD DOT-3
CALIPER A INSTALLATION
Tighten the caliper shafts evenly while push-
ing them against caliper B.
NOTE
I
Tighten the shafts carefully, noting the
I
[
mating faces of calipers A end B.
Connect the brake hose.
Install the inspection cover.
Bleed the brake system.
Date of Issue: September, 1977
O HONDA MOTOR CO., LTD.