Front Brake Panel; Front Brake Lining Thickness; Brake Shoe Replacement; Brake Rod Adjustment - Honda CB400T Shop Manual

HONDA
FRONT WHEEL/BRAKE/SUSPENSION
C B 4 0 0 T
FRONT BRAKE PANEL (Type
I
)
FRONT BRAKE LINING
THICKNESS
Measure the brake lining thickness.
THICKNESS
BRAKE SHOE REPLACEMENT
NOTE
I
Do not loosen the brake rod unless
1
necessary.
Pry off the cotter pin and remove the washer.
Replace the shoes with new ones.
Appty grease to the cam contacting faces of
the shoes.
stopping
PO
wer.
Keep grease off the brake linings. Wipe
BRAKE ROD ADJUSTMENT
Adjust the brake rod length
a t
i t s threaded
ends so that both shoes start to hold
a t
the
same time, while observing the cam and shoe
movement.
brake arm aligns with the punch mark
BRAKE DRUM INSPECTION
Measure the brake drum 1.0..
I.D.
SERVICE L l M l
181.0 mm
(7.13 in.)
1 2 - 1 0
Date of Issue: September, 1977
O
HONDA MOTOR CO.. LTD.