Crankcase Removal Of Parts; A.c. Generator Removal - Honda CB400T Shop Manual

~.
HONDA
CRANKCASE
C B 4 0 0 T
REMOVAL OF PARTS
tion 5 ) .
Remove the cylinder head, cylinders and
pistons (Sections 6 and 7 ) .
Remove the clutch and oil oumr, drive chain
Drain the engine oil.
--.
Remove the engine from the frame. (Sec.
'.
. ' :
(Section 81.
Remove the gearshift sp~ndle (Section 11 ) .
UNIVERC
A.C. GENERATOR REMOVAL
alled without removing the engine from
the frame.
Remove the A.C. generator rotor bolt.
I f the cylinder head i s off, be carful not
t o pinch the cam chain while removing
Remove the A.C, generator rotor.
NOTE
Avoid damaging the pickup on the
outside of the rotor.
Remove the stator and fixed pulser.
CAUTION
I
Never loosen the two painted screws at
I
the stator to prevent the ignition
timing from becoming out of time.
9- 2
u a t r of Issue: September, 1977
@ HONDA MOTOR CO., LTD.