Transmission Inspection - Honda CB400T Shop Manual

HONDA
C 5 4 0 0 T
TRANSMISSION
TRANSMISSION INSPECTION
Check gear dogs for excessive or abnormal
wear.
Inspect the 1.0. of each gear.
SERVICE LIMIT:
M4,M5 and C3 gears: 25.10mm (0.988in.)
C1 gear : 24.10 mm (0.949in.1
Measure the I.D. and O.D. of the countershaft
low gear (C1) bushing.
SERVICE LIMITS :
1 . 0 .
: 20.06 mm (0.790 in.)
O.D. : 23.95 mm (0.943 in.)
Measure the O.D. of the main- and counter-
shafts.
SERVICE LIMITS:
A: 24.93 mm (0.981 in.)
B: 24.93 mm (0.981 in.)
C: 19.96 mm (0.786 in.)
Calculate the clearance between the gear and
gear shaft or bushing.
SERVICE LIMIT: 0.15 mm (0.006 in.)
O.D. "A"
MAIN SHAFT
Date of Issue: September, 1977
O HONDA MOTOR CO., LTD.
11 - 5