Crankshaft/Starter Clutch Removal; Starter Clutch Inspection; Starter Drive Gear Inspection; Crankshaft Inspection - Honda CB400T Shop Manual

. .
HONDA
CBLCOOT
CRANKSHAFT/BALANCER
CRANKSHAFT/STARTER CLUTCH
REMOVAL
Remove the oil seal.
Remove the starter drive gear.
Remove the "torx" bolts.
Remove the starter clutch.
8
STARTER CLUTCH INSPECTION
Inspect the roller for smooth rotation.
Remove the roller and check for excessive
or local wear.
a
STARTER DRIVE GEAR
INSPECTION
Inspect the starter drive gear for damage or
local or excessive wear.
O.D. SERVICE LIMIT:
54.15 mm (2.132 in.)
DOWEL PIN
o.D.
I
OVERRUNNING CLUTCH
STARTER DRIVE GEAR
I
I
CRANKSHAFT INSPECTION
Set the crankshaft on a stand or V blocks.
Set a dial gauge into the center main journal.
SERVICE LIMIT:
Rotate the crankshaft two revolutions and
0.05 mm (0.002 in.)
read runout at the center journal.
Date of Issue: September. 1977
o
HONDA MOTOR
co..
LTD.
10-7