Component Assembly; Float Level Adjustment; Craburetor Assembly - Honda CB400T Shop Manual

HONDA
C B 4 0 0 T
FUEL SYSTEM
Inspect the diaphragm and valve for cracks
and brittleness.
COMPONENT ASSEMBLY
To assemble the air cutoff valve, float cham-
ber and vacuum cylinder, reverse the dis-
assembly procedure.
FLOAT LEVEL ADJUSTMENT
To adjust the float level, bend the float arm
carefully until the float t i p just .contacts
the float valve.
FLOAT LEVEL: 15.5 mm 10.61 in.)
pry-
..*' ! '
CARBURETOR ASSEMBLY
Slip an O-ring over each end of the fuel joint
pipe as shown.
Assemble the right and left carburetors
through the spring.
FUEL JOINT PIPE
Date of Issue: September, 1977
@ HONDA MOTOR CO., LTD.
4- 7