Balancer Chain Adjustment; Air Cleaner Maintenance - Honda CB400T Shop Manual

HONDA
C B 4 0 O T
INSPECTION AND ADJUSTMENT
BALANCER CHAIN ADJUSTMENT
Drain oil from the engine.
Remove the tachometer and clutch cables.
Remove the right foot peg and kick starter
arm.
Remove the right crankcase cover.
Loosen the 8 mm adjuster nut.
will position itself to provide proper
Retighten the 8 mm nut.
TORQUE: 2.0-2.5 kg-m (15-18 lbs-ft)
is lowered so that the groove contacts
Remove the 10 mm and 8 mm nuts; remove
the stopper
plate.
1
. .
.
Install the stopper plate with different spline
engagement.
Reinstall 8 mm and 10 mm nuts and tiohten
to specified torques:
TORQUE:
8 mrn: 2.0-2.5 kg-m (15-18 lbs-ft)
10 mm: 3.0-3.5 kg-m (22-25 lbs-ft)
NOTE
I
Install the
8
mm nut first.
A I R CLEANER MAINTENANCE
Remove the seat.
Remove the air cleaner cover by removing
the attaching screws.
the shaft is below the horizontal line.
Date of Issue: September, 1977
@ HONDA MOTOR CO., LTD.
3-
7